Hello,
I want to control my AC using two raw codes (one for Power On an the other for Power OFF). I would like to know if it is possible to identify each of them to get recognized also from Bluetooth HC-05 in order to be able to control the AC via Android as below :
I am using IRsendRawcode example of IR remote library.
Could you please give me a hint?
Thank you in advance
How to send two raw codes to control AC
How to send two raw codes to control AC
You do not have the required permissions to view the files attached to this post.
Re: How to send two raw codes to control AC
Unfortunately, you have not provided enough details/specifics for me to be of much help.
sendRAW will work fine (as long as you have enough RAM).
Also...check out
- our blog post on recording long AC signals (works better than IRremote & is more accurate with timings)
- our blog post on sending long signals with Arduino from flash, which may of itself solve you issue. (Doesnt use up scarce SRAM)
sendRAW will work fine (as long as you have enough RAM).
Also...check out
- our blog post on recording long AC signals (works better than IRremote & is more accurate with timings)
- our blog post on sending long signals with Arduino from flash, which may of itself solve you issue. (Doesnt use up scarce SRAM)
Re: How to send two raw codes to control AC
Hello,
Thank you for your help, it really worked with the code from blog post on sending long signals with Arduino from flash.
But what I really want, is not to send several signals with a command.
I want to put a condition for each signal in order to send them. For ex. if i send "on" turn on the ac, if i send "off" turn off the ac...
I dont know if I did explained well..
Thank you for your help, it really worked with the code from blog post on sending long signals with Arduino from flash.
But what I really want, is not to send several signals with a command.
I want to put a condition for each signal in order to send them. For ex. if i send "on" turn on the ac, if i send "off" turn off the ac...
I dont know if I did explained well..
Re: How to send two raw codes to control AC
search for 'Arduino serial command parse' on google
-
TateStiroh
- Posts: 1
- Joined: Mon Feb 10, 2020 4:50 pm
Re: How to send two raw codes to control AC
Hi...I wanted to build an air conditioner IR controller, and wanted help if figuring out if I can use the Wio Link and Grove components to make this work?
The first phase would be to control the A/C to switch between COOL and FAN based on temperature. Future phases will include using my phone when away from the house to turn on A/C, and other ideas.
seo toronto
The first phase would be to control the A/C to switch between COOL and FAN based on temperature. Future phases will include using my phone when away from the house to turn on A/C, and other ideas.
seo toronto
Last edited by TateStiroh on Wed Feb 19, 2020 6:22 pm, edited 1 time in total.
Re: How to send two raw codes to control AC
I guess it is possible with that equipment. However I have not verified this platform or the components used.
Of course, I would always recommend out own modules, available via our online shop (link above).
Specifically, our range of A.IR shield modules:
A.IR Shield ESP8266 TRx (and TX only)
A.IR Shield ESP32 TRx (and TX only)
..we also have a range of other solutions that are designed with only high quality IR components.
We also have a number of posts on our blog that help with AC infrared signals and our AnalysIR application is by far the best tool available for IR.
Of course, I would always recommend out own modules, available via our online shop (link above).
Specifically, our range of A.IR shield modules:
A.IR Shield ESP8266 TRx (and TX only)
A.IR Shield ESP32 TRx (and TX only)
..we also have a range of other solutions that are designed with only high quality IR components.
We also have a number of posts on our blog that help with AC infrared signals and our AnalysIR application is by far the best tool available for IR.