Re: IR Codes Doesn't Control AC
Posted: Thu May 23, 2019 2:33 pm
Here's the receiver's code:
https://www.analysir.com/blog/2014/03/1 ... s-arduino/
Here's the sender's Code:
https://www.analysir.com/blog/2014/03/1 ... s-arduino/
Here's the sender's Code:
Code: Select all
/*
* IRremote: IRsendRawDemo - demonstrates sending IR codes with sendRaw
* An IR LED must be connected to Arduino PWM pin 3.
* Version 0.1 July, 2009
* Copyright 2009 Ken Shirriff
* http://arcfn.com
*
* IRsendRawDemo - added by AnalysIR (via www.AnalysIR.com), 24 August 2015
*/
#include <IRremote.h>
IRsend irsend;
void setup()
{
}
void loop() {
// 0 : PANASONIC128_216_280AC : : 40040720000000604004072000140401F50000700700009100002F : 216 : 0
//Note: Be sure to use the correct Carrier frequency, for each individual signal, as(or if) indicated above
//
// NB: Not all protocols are supported by IRremote or IRLib. You may need to edit the code below manually
// Automatically Generated by AnalysIR for xxxxxxxx, visit https://www.AnalysIR.com/ or email info@....... for further details
int khz=38; //NB Change this default value as neccessary to the correct carrier frequency
uint16_t Signal_0_0[] = {3500,1750,435,435,435,1300,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,1300,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,1300,435,1300,435,1300,435,435,435,435,435,1300,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,1300,435,1300,435,435,435,435,435,435,435,435,435,435,435,9896,3500,1750,435,435,435,1300,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,1300,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,1300,435,1300,435,1300,435,435,435,435,435,1300,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,1300,435,435,435,1300,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,1300,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,1300,435,1300,435,1300,435,1300,435,1300,435,435,435,1300,435,435,435,1300,216,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,1300,435,1300,435,1300,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,1300,435,1300,435,1300,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,1300,435,435,435,435,435,1300,435,435,435,435,435,435,435,1300,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,435,1300,435,435,435,1300,435,1300,435,1300,435,1300,435}; //AnalysIR Batch Export (IRremote) - RAW
irsend.sendRaw(Signal_0_0, sizeof(Signal_0_0)/sizeof(int), khz); //AnalysIR Batch Export (IRremote) - RAW
// AnalysIR IR Protocol: PANASONIC128_216_280AC, Key:
}