HOw to use generated codes

[gggggggg]

Hello, I have a ESP-12F, and a Samsung AC. I have captured the codes:

RAW:

Code: Select all

Raw: (349) 748 -17772 3064 -8968 522 -466 526 -1468 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 526 -1468 522 -466 522 -466 526 -1468 526 -1468 522 -466 526 -1468 526 -1468 526 -1468 526 -1468 526 -1468 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 526 -1468 526 -1468 580 -2972 3064 -8968 526 -1468 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 526 -1468 522 -466 522 -466 526 -1468 522 -466 526 -1468 526 -1468 526 -1468 526 -1468 526 -1468 526 -1468 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 580 -2972 3064 -8968 526 -1468 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 526 -1468 522 -466 522 -466 526 -1468 526 -1468 526 -1468 526 -1468 522 -466 526 -1468 526 -1468 526 -1468 526 -1468 526 -1468 526 -1468 526 -1468 526 -1468 522 -466 522 -466 522 -466 526 -1468 526 -1468 526 -1468 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 526 -1468 526 -1468 522 -466 526 -1468 522 -466 526 -1468 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 522 -466 526 -1468 526 -1468 522

LIR:

Code: Select all

LIR: 24 02EC 456C 0BF8 2308 020A 01D2 020E 05BC 0244 0B9C 01 23 F2 73 22 33 2F 35 F2 FF 2F F2 43 34 13 F2 83 22 32 F3 6F 2F F2 FF 26 41 3F 28 32 2F 34 2F 38 22 23 33 F2 83 32 32 3F 29 33 2F

My question is, assuming I have all the hardware setup ok. Using ESP8266/Arduino C code (not LUA code) , how do I send this signal using my own ESP.

thanks

[AnalysIR]

In our latest blog post, we show how to do this, with an example sketch and circuit.

see
https://www.analysir.com/blog/2017/01/2 ... r-signals/

FYI: SendIR is available via our shop & we also plan to release an IR shield for the Wemos Esp8266/NodeMCU modules in the next month or 2.
https://www.analysir.com/blog/shop/